About daskaarismatik

daskaarismatik · 06-05-2021

Hello all, I would like you to support me for my AP which is not getting full power from the switch.From the WLC PoE Status of the AP, It is showing "PoE/Medium Power (15.4 W)" and the LED is blinking blue, green, red. The output below is what I am g...

daskaarismatik · 06-09-2021

Hi all,After configuring another port (gi1/0/45) on the same stack switch and moving the AP onto it, the AP worked well and got full Power.The PoE issue is from the second Switch Port gi2/0/45, the AP could not work on this particular port even afte...

daskaarismatik · 06-07-2021

Hi Waqas,You will find below the output of the "show cable-diagnostics tdr interface gi2/0/45" command: Interface Speed Local pair Pair length Remote pair Pair status--------- ----- ---------- ------------------ ----------- ------...

daskaarismatik · 06-06-2021

Hello Scott,There was no issue before the upgrade, and I'm not sure if the switch code might be the issue for this case because there's another 2802i AP model currently connected to the same switch and it's working fine.

daskaarismatik · 06-06-2021

Hi Rps-Cheers,I consoled to the AP to see whether the AP were not having some issue. I could not find anything, the AP were able to ping and join the WLC. I had even reset the AP and started over the configuration, the only particularity I could noti...

daskaarismatik · 06-06-2021

Hi Kidandconan, I had checked the cable, it was not the problem but I eventually replaced it with a new cable.It was working before on the same switch, there were 2 APs connected to it, and many other endpoints(IP Phones, PC, etc).Users' complain sta...

Member Since	‎02-24-2020 12:52 AM
Date Last Visited	‎06-13-2021 06:13 PM
Posts	6

User Statistics

User Activity

Power Inline Issue on AP2802i-E-K9 | Displaying PoE/Medium Power (15.4 W) on the WLC

Re: Power Inline Issue on AP2802i-E-K9 | Displaying PoE/Medium Power (15.4 W) on the WLC

Re: Power Inline Issue on AP2802i-E-K9 | Displaying PoE/Medium Power (15.4 W) on the WLC

Re: Power Inline Issue on AP2802i-E-K9 | Displaying PoE/Medium Power (15.4 W) on the WLC

Re: Power Inline Issue on AP2802i-E-K9 | Displaying PoE/Medium Power (15.4 W) on the WLC

Re: Power Inline Issue on AP2802i-E-K9 | Displaying PoE/Medium Power (15.4 W) on the WLC