Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I appreciate how quickly the Cisco collaboration devices are adapting to the needs of modern conferencing, including their ability to interact with 3rd party devices. The one issue that keeps bothering me are the error warnings, which I can't c...
Hi all, We are having a peculiar issue that is consistent across a handful of Cisco Room Kit Plus and Room Kit rooms we are provisioning, but doesn't happen to all of them. For the Room Kit rooms:- We have a 3rd party external mic and 3rd party ext...
Hi all, I have a device made by a manufacturer called Crestron that takes PoE plus. I have a pair Catalyst 3850s with stacking cable, and quite a few PoE devices on it, all of them 15.4W, but still far within my PoE budget. My issues is, when I plug...
Hello, we are using Cisco SX80's with Biamp DSPs. They are functioning as expected. All table mics go to the DSP, and then to Microphone Input 1 (set to Line) on the Cisco. Then, the line out of the Cisco device goes back to the Biamp to hit the soun...
Bobby, thanks for going over this in detail. Yes, AEC would be cancelling the ultrasound but why do I see the signal on the DSP when proximity is disabled and the Ultrasound volume is set to 0 and Static? I don't want ultrasound or anything having to...
Wayne, proximity was disabled, and when I open the admin guide you linked to me (which I have already gone through), a search of the phrase 'people detection' yields no results. You'll notice that almost every one of my posts on this forum relate to ...
Let me bump this issue one more time - most of the content above has been worked through. However, I can't seem to find an answer to a simple question: when using a Cisco Room Kit (not Plus or Pro) with an external speaker, sound check does not play ...
Leo, thank you for your continued help. I will be back onsite today, however I do not have a Cisco PoE phone or any other PoE+ device. I am wondering if you saw anything in the config file that might be suspect. I seem to have stumped many people wit...
The behavior is the same on both switches and after trying different ports on each. The link flaps and the NIC on the Crestron device never lights up. I will attach the config file here but I'm still at a loss for what is or even could be causing thi...
