Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 clusters in my Environment and i created an Identity Group in Both clusters with same Identity Group Name . but when i run API i see both of them with 2 different group IDs. This was not the case before 3.3 can you help me ?
HI all, I coud observed that one of the monitoring tools, the following memory are almost 100% could you please assist us over this Cached memory 12.5 GB 12.5 GB 100 %Memory buffers 31.2 GB 41.6 MB 0 %Physical memory 31.2 GB 29.9 GB 96 %Shared memory...
We are trying to implement ACL in order to allow SNMP traffic in our Network. We are using the Cisco Prime as an SNMP Server. Could you please assist us with the commands.This is what i found outpermit udp X.X.0.0 0.0.255.255 eq snmp host SERVER_IPpe...
hi Balaji, Thanks for the assistance. So if my prime Ip is 172.168.12.xxx the conf would be access-list 11 permit 172.168.12.xxx 0.0.0.255and what does the hosts represents access-list 11 permit host 11.1.1.1 access-list 11deny any snmp-server commu...
