Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a full deployment of ISE, Trustsec, UCS, 1000v and Nexus 7k's to secure our virtual shared desktop and VDI enviroments. It all works, RBACL policys gets pushed, updates and enforces policy. The " show cts role-based counters" command works bu...
We have a full deployment of ISE, Trustsec, UCS, 1000v and Nexus 7k's to secure our virtual shared desktop and VDI enviroments. It all works, RBACL policys gets pushed, updates and enforces policy. The " show cts role-based counters" command works...
When creating a DACL for my groups I used the Syntax " permit tcp any 192.168.20.0 0.0.0.255 eq 22 443" for one of my acl's inside the DACL and the syntax check validated it. When I pushed it to my groups it also worked but I have heard that this typ...
Hello,If I'm going to use the 3945 WAAS- UCS/k9 bundle on a point to point link is it necessary to have a separate central manager or can the modules be managed by the command line? I will never have more WAAS implementation other than this point to...
I'm replacing my older 3825's that use a 100 meg Ethernet Circuit between sites that encrypt all of the traffic. I’m upgrading to the 3900 series and we may add WAAS into the mix. I have CPU issues now with the 3825 and encryption as my traffic is in...
Figured it out. N7k's handle logging differenty. Use this command on N7k'sshow logging ip access-list cacheGR-N7K-2-CORE# show logging ip access-list cacheSrc IP Dst IP S-Port D-Port Src Intf Protocol Hits---------------------------------------------...
Figured it out. N7k's handle logging differenty. Use this command on N7k'sshow logging ip access-list cacheGR-N7K-2-CORE# show logging ip access-list cacheSrc IP Dst IP S-Port D-Port Src Intf Protocol Hits----------...
We have the same set up across an OTV link and have tested this scenario out multiple times. You don't have to do anything if communication is broken between the prim and secondary nodes. The secondary will automatically start authenticating devices ...
Thanks for the response but it's wrong. Cisco supports stacked ports in 1.2 for wired users. They carried over 1.1documentation to 1.2 and never updated it. We have it in writing from Cisco tac.
