Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is anyone using TA-eStreamer 3.6.8 with Splunk Enterprise Security? Although the add-on says it's CIM 4.x compatible we're not seeing any of the cisco:estreamer:data sourcetype matching data models. Looking at the add-on it doesn't have any tags.conf...
Hello All,For many years we've had the following vlan and port security config on our 3560s:-switchport access vlan 520switchport mode accessswitchport voice vlan 560switchport port-security maximum 2switchport port-security maximum 1 vlan accessswit...
We've got a WS-C3750G-24WS-S50 that has been happily running in switch mode for some time. We now need to use it for IP routing as well. However as soon as I add "ip routing" to the config the WLC and the switch start missing keep alives. "sh platfor...
We're seeing the same issue on a 4506E Sup7e and cat4500e-universalk9.SPA.03.02.00.SG.150-2.SG.bin.Has this been fixed yet? CSCub56668 suggests not and CSCtq40467 is restricted so I can't read it.
Leo Laohoo wrote: Forgot to ask you, are you seeing this issue on a 48-port PoE switch?WS-C2960-24TT-L is the only model of 2960 I currently use, so no 48-port PoE to check I'm afraid.
Hi Leo,The 2960-S has double the memory of the 2960 so I can see why you're not seeing this issue.It looks like 12.2(58) and 15.0(2) are just too memory hungry for a 2960. I'll stick with 12.2(55) until I can replace my 2960 switches.Thanks,Jonathan
