About Reyad Safi

Reyad Safi · 12-17-2023

hi...we have CUCM v14, it's integrated with the Active Directory to sync the telephone directory.we noticed that, the CUCM pull all users from the AD, but we need to pull the users who have the telephone number only.we configured a custom filter in t...

Reyad Safi · 04-20-2014

Hello Experts...i have a problem when using ACS 5.1 with AP1141 through EAP-TLS authentication method.when i try to connect my laptop , it's authenticated sucessfully , but when i try to authenticate third party Black Box using EAP-TLS , i have an au...

Reyad Safi · 01-24-2014

Hello every body...I have ISE appliance integrated with Active Directory to authenticate the users , and i have WLC integrated with the ISE also.the integration done successfully , and now any user want to access the network through the WIFI ( Dot1x)...

Reyad Safi · 01-08-2014

Hello Expertsi have ISE with advanced license for 1500 user , and i have WLC 2504 , and i need to integrate the WLC with the ISE to get ISE features for the Wireless users like posturing , remediation and the authentication as well .my question : is...

Reyad Safi · 02-12-2013

hi expertsi have WLC 2504 , and i have LAP1141N , i need to put the AP in remote branch , and it should registered to the 2504 WLC at H.Q over WAN .is it work , and is there any special configurations needed to get this work ...regards

Reyad Safi · 12-20-2023

could you please advise what this filter for:(&(&(objectCategory=user)(objectClass=user)(!telephoneNumber=\20)(&(objectClass=user)(telephoneNumber=*))))

Reyad Safi · 11-11-2014

hello Experts...i'm facing a similar problem with our ISE.i use the ISE to authenticate Wireless Users and VPN Users.when i enable the ( Change password on next login ) for WIFI users , the pop up screen shows to the user to enter new Password and e...

Reyad Safi · 04-30-2014

hello,,,i do confirm that , the 3rd Party already trust the AAA CA , and the AAA trust the 3rd Party CA.when i use Cisco 4.1 Radius , the client is connected without any problem.to clarify the status , this client accept only eap-tls authentication m...

Reyad Safi · 04-21-2014

thank you Saldohi install wireshark to get the authentications logs , and i compare this log with working ACS....the only difference is EAP-TLS Flag: 0x00 ,0... ... = length include false , while its true at the working one.any recommendation Reyad

Reyad Safi · 01-28-2014

thank you Andy for your help....Reyad

Member Since	‎09-17-2010 01:35 PM
Date Last Visited	‎12-27-2023 12:09 PM
Posts	54
Total Helpful Votes Received	5

User Statistics

User Activity

CUCM

ACS EAP-TLS

ISE for Mobiles

ISE License for WLC

2504 WLC over WAN

Re: CUCM

hello Experts...i'm facing a

hello,,,i do confirm that ,

thank you Saldohi install

ISE for Mobiles