I'm looking for some opinions for the case of using used and after-market SFPs specifically for use with Nexus 5548 and 6248UPs.

I'm with a 3250 to configure EEM. The 'event' command is unavailable.I'm running c3250-adventerprisek9-mz.151-2.T2.bin. Is EEM on available for the 3250?Daniel

There might be a simple solution to this problem, but I certainly can't find it. I understand that I have a router in area 0 receiving routes from other routers in area 0 (the core) and putting them in the routing table as IA routes. The interface th...

I have stack of 3750s running advancedIP image, and a 3550 running IPServices. Both are running IP Routing and are apart of per SVI HSRP groups. The switched infrastructure runs rapid-pvst, where the 3750 stack is the root. The 3750 is also the activ...

The topology consists routers and layer 3 switches. These are 2 remote locations with primary connections via MPLS and a backup/"primary between sites" via high-bandwidth radio.There are obviously several subnets here, and everything on the LAN side ...