Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Can I limit bandwith for guest in a wlan network with out Wlan controller? and of course, how can I do it?thanks in advanceP.S.: I heard something about bronze profile in a wlan controller envoiroment, I need something like that but in an inde...
Hi all,I have this situation, I need to establsih an IPsec communication to another site but I need to identify all my packets sent, as a different networks as my local one. for example: my local network is 10.5.0.0/24 and I need to sent packets as 1...
Hi all,I have an ASA 5505 with 7.2 DM and 5.2 ASDM and I´m trying to configure webVPN.I enable Interface Outside for WEBVPN.but when I try to access this message appear in log:TCP access denied by ACL drom XXX.XXX.XXX.XXX (my remote ip public)/62144 ...
Hi all,I have one CME (with SCCP ephones) configured to make outbound calls using a SIP line provided by and external SIP proxy, I just configured 4 credentials in sip-ua, so I can receive calls from 4 diferents numbers. But when I try to make outbou...
I test with port 444 when ASDM was in 443. But I´m going to change webvpn to 8443 and we will see waht happen.I see the deny message in the ASA log with the ASDM
thank you JenniferDo you happen to have static NAT configuration prior? I will try to reset Nat configurationand can you "clear xlate"? clear state and nothing,Have you tried to reload the ASA? Yes I tried to reload it a lot of times and nothing. (I ...
thanks for your fast answer Jennifer,that two lines are there because I was trying to add and ACL permitting from my remote public IP to the interfaz external (without results).I just remove this two lines and same result. TCP acces denied by ACL.
