Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I use a MAR3200. The port of the MARC (F0/0) and one port of the switch card (FESMIC F2/1) are connected to 2 devices belonging to the same subnet. IRB is enabled and a BVI is defined.PCA is connected to F0/0, PCB is connected to F2/1.When PCA sen...
Hi,I have a few questions about the WLC2006 CLI:1 - Client statistics can be displayed on the WLC2006 with the command "show client detail <MAC addr>". I don't find in the documentation how to clear these statistics.2 - Comments are generally welcome...
Hi,I want to synchronise a WLC2006 with a NTP server. After having set the NTP server IP address with the GUI, the ping operates properly, but the WLC keeps the date and time set manually. The NTP server is connected to the port supporting the dynami...
Hi,I perform interoperability test with a partner between a MAR3200 fitted with a WMIC C3205 and a APC OmniAccess 4302 running a V2.5.3 release. The association is not done.The WMIC generates an association request including the tags 0, 1, 133, 149 a...
Hi,I use a WMIC C3205 within a MAR3200 as workgroup bridge in a test bed environment. The other side of the radio link is made of LAP 1242AG controlled by a WLC2006. Only one AP is used for the time being and the link test results provide RSSI around...
Thanks Donald for your answer. I tried your suggestion but results are not so good. Pings from MAR to PCA on f0/0 operates properly. Pings from MAR to PCB on f2/0 does not work. PCB receives the ping request and replies, but the MAR does not receive ...
