Hi,I have a very strange performance on my 1760 router with 12.4(9) IOS setup for CME.Whenever I get inbound calls on the FXO VICs, the router crashes.Has anyone experienced this type of performance on the 1760 router and what're the possible resolut...
Hi,Pls can someone assist me with.We installed a CME4.0 for a customer and setup the services url for RSS feeds but the customer uses a proxy server.I entered the proxy server IP address (url proxy-server x.x.x.x) under the telephony-service interfac...
Hi,We're presently doing a WAAS solution demo for a customer and we keep getting this error "The device is about to disconnect from the network." and "The device is operational and ready to participate in the network". This happens to the core and ed...
Hi,I want to implement call restriction using after hours and login timeout on CME4.0. This will enable users enter a PIN after hours before a call can complete. I've implemented it and it seems not to be working. What is it that I'm doing wrong.I'll...
Hi,I have a very strange problem with callerID from my PSTN.The lines from the PSTN is connected to a vic2-2fxo card. I PSTN has callerID enabled which I can see whenever a caller calls on the telephone box but when the line is placed on the fxo, it ...
Thanks but I've actually done all of these without success. Do you have a useful link? Which debug command can I run to verify the call progress apart from the debug voice application all?Regards,
The exact problem as explained in the original post. I have a CME and have enabled AA but the AA tcl script does not kick in so I do not hear the welcome prompt and other menu. I'm using vic2-4fxo is pick the call.Is it that AA cannot work with the a...
Hi,Have you been able to fix this problem? I presently have a similar situation with my AA service on CME with fxo ports.Any body in the forum with a fix?Regards,
Thanks for your response.Its not a conncetivity issue as the devices can all see themselves network wise. Moreso, the WAE are both registered to the CM while you can manage the WAEs from the CM.Why is it that I do not see passthrough traffic? Assumin...
