Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Folks,
I have a network of 12 APs - 5 x 3702i, 4 x 1532, and 3 x 1552H - all connected to a 2504 WLC.
I've successfully configured the 2504, the 3702s and the 1530s - but I'm having a problem with the 1552H's.
I've tried all three, and the same...
Hi There,
I have a 2504 WLC that is currently running 5 x 3702i and 1 x 1532. Today I received 6 x 1552H (AIR-CAP-1552H-E-K9) that I also need to join to the controller.
I activated the relevant licences, and confirmed I have 6 unused licenses avail...
Hi There,
Thanks for your response - I've attached the requested output.
Maybe the ap show version provides a clue - judging by the version info: System image file is "flash:/c1520-k9w7-mx.153-3.JC1/c1520-k9w7-xx.153-3.JC1" - am I right in thinking...
Soooo.... I tried joining the rest of the APs today - still no joy... until...
I unplugged the AP from the front ports of the WLC and plugged it into a nearby switch - worked straight away. Odd that the first one managed to join plugged into that por...
Soooo.... I tried joining the rest of the APs today - still no joy... until...
I unplugged the AP from the front ports of the WLC and plugged it into a nearby switch - worked straight away. Odd that the first one managed to join plugged into that por...
Thanks for your replies gents, the WLC is on 8.2.141.
I ran the sh int command, and that only returned one MAC address - which is the one I added to the filter list - the exact text was "BVI1 is up, line protocol is up Hardware is BVI, address is 2c3...
