Hi,I have a SG350-10P switch running the last 2.5.5.47 firmware.The switch is set to factory defaults. Has yet to be programmed.I noticed that my access points didn't get any power. Checked with an external PoE adapter, AP working fine. Just not with...
Hi all, A client of mine has an MX100 firewall, on which 2 VLANs are configured on the inside. On each VLAN interface a DHCP pool is active. Now it _seems_ that something strange is happening.... Could it be, anyone ever heard of, that when on the fi...
Hi, AP is not the issue. Issue is that the switch says it has only 1W total power available for PoE. It should be 62W. Unit Module Nominal Consumed Temp SW PSE chipset Power (W) Power (W) (C) Ve...
Hi M,No AP connected, no power needs in the above setting. However, I'd like to connect some APs, consuming 3.2W each. But everything I connect results in a "Failed".Switch says there's only 1W available. All my other SG350-10P switches says there's ...
Hi, All Meraki, no exceptions. Switch says it sees only 1 DHCP server. All MR42 do tag all VLANs, but there are some trunks in between the MR, the MS and the MX I don't know about yet. Maybe some native VLAN problem..... Greetz Erik
