Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I like to know if CUBE using SIPREC can fork media to two recorders at the same time or one at a time with second as a redundant option. SIPREC dialpeer has session-target <Rec. Server>, is it possible to have two of these or define a server grou...
HelloI need help with inbound dial-peer matching where I have two dial-peers inbound from cucm (see attached diagram & config). I can get this working if I shutdown either dial-peer 401 or 402 but when both are active 402 always gets selected for bot...
YPHi, I have a bit of an issue due to Cisco's limited recording options! We have CUCM with 8800 phones & CUBE HA for PSTN access.Requirement is to capture point-to-point, SNR and all forwarded calls to PSTN for given users. I don't think there is any...
sound advice Roger! removed the URI match and all worked like a charm! now streamlined it so only need one in/out pair for standard calls and one just for prefix route...Thanks again guys for great help!
Thank you Roger for quick reply, I have definitely overlooked the URI match, will look in it and come back...and yes, DPs are just copies and have more config than needed, used for a quick PoC... will be cleaned up.
Thanks Roger, yes used the voice translation-profile to remove the prefix from YY and all working great!I did this before posting but forgot to fix the called number in VFC recorder profile so when I was testing VFC would not accept number without pr...
