Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Currently I run a 3750 stack with the following members:sh run | incl provisiswitch 1 provision ws-c3750g-24ts-1uswitch 2 provision ws-c3750g-24ts-1uswitch 3 provision ws-c3750g-24ts-1uswitch 4 provision ws-c3750g-24ts-1uswitch 5 provision ws-c3750g-...
Hello,Today I set up a config with 4 1200ap's and 1 cisco acs for leap authentication and accounting. This works fine.However I would like to finetune this with the result that each user can only be authenticated once. This to prevent several users f...
I just installed an ap350 and noticed the power injector LED flashing green instead of always lit.What does this mean ?When i disconnect the AP the led is steady orange...Please help,Lex van der LugtPQR - Holland
hello,Yesterday i installed a bridged link as follows:lan-br350A(nonroot)-yagi-> 1,5km <-omni-br350B(nonroot)-> 0,5km <-yagi-br350C(root)-lanWhen testing i experienced the following strange behaviour:ping from A to B looks o.k. for ab...
Please help with the following:After connecting the e1 line to the vwic the following errors start coming in on the console output:%E1T1_MODULE-3-LINEFLAP: Interface Serial0/0:0 receiving excessive errored packetsWhen i take a look with show controll...
Thanks for your help !Here is what I did:renumber new switches to 6 and 7copy the interface config g6/0/1 to 7/0/28 from the old switches to notepadpowered off switch 6 en 7 and disconnected stackwise cables, remaining stack stays in service.remove p...
Hello Naidu,Thanks for your quick reply.I read the link above.BUT I am replacing two ws-c3750g-24ts-1u's with 1 ws-c3750e-48td.Any thoughts on this ?Lex.
Hello Kevin,Thanks for the reply. I use an external database, in this case windows nt.I checked the default group option "sessions available to users of this group " to 1, but this does not has the desired effect...Regards,Lex.
