About linh.hl.nguyen

linh.hl.nguyen · 06-12-2020

I have two Cisco 9508 running NX-OS, and I just want to simply create a vlan, and assign a port that connects the two 9508s.On one 9508, the spanning tree shows the port (1/36) in that vlan in FWD state, but on the other 9508 spanning tree shows the ...

linh.hl.nguyen · 05-27-2020

I'm having a hard time inserting an N9K-X9732CX-EX line card into a 9508 chassis. Is this line card compatible with the 9508 chassis or is there a trick to insert this line card?

linh.hl.nguyen · 06-25-2020

Hello,Thanks for your recommendation.Since I've already had a vpc peer link on an existing port channel, it will not let me have vpc peer link on a new port channel (with different port members). Is only one vpc peer link allowed between the 2 switc...

linh.hl.nguyen · 06-12-2020

Hi Reza,Thank you very much for your suggestion.I did what you suggested and things look better now. I can ping across. Please see output and the config of int e1/36 that you asked for.One question though, why do I not have this problem when I add vl...

linh.hl.nguyen · 05-27-2020

I found the problem. The Cisco 9508-FM chassis does not support the N9K-X9732C-EX line card.

Member Since	‎05-27-2020 12:29 PM
Date Last Visited	‎06-26-2020 12:54 PM
Posts	5

User Statistics

User Activity

Spanning tree blocking port on vlan

Inserting an N9K-X9732C-EX line card into a 9508 chassis

Re: Spanning tree blocking port on vlan

Re: Spanning tree blocking port on vlan

Re: Inserting an N9K-X9732C-EX line card into a 9508 chassis