Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Some times, these models running as WGB disassociate due to roaming and just stop trying to reconnect. Sep 18 11:33:49.958: %DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: Missed beaconsSep 18 11:33:59.970: %DOT11-4-CANT_ASSOC: Interface D...
Using Cisco AP1532E as WGB with image ap1g3-k9w7-mx.153-3.JK7. From time to time some WGBs disconnect from the uplink APs. hhappens only when the mobility device is not moving and parked close to the one of the uplink APs. Coverage is excellent. The...
I am trying to test this feature using both the ME 8.10.151 and the ap3g3-k9w8-tar.153-3.JPK2.tar. I have been following the guide for Wave2 APs here: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-10/config-guide/b_cg810/workgroup_bridg...
VIm trying on my desk to configure two Cisco C1117-4PM connected to eachother using the vdsl interface on a standard telephone cable. Running 16.12.03 image.RoutingI've read the configuration information regaring setup of these controller, but all ...
Thanks for replying B. Yes, we have done a site survey and are on release 153-3.JK7. I can now see there JK11 is available, I will try an upgrade, but dont think this will make a differense. coverage is good, just a few clients.
Hi Jagan. Thx for replying. I cannot share the complete log due to company rules.Show bridge command is ok, nothing suspicious. show dot11 associations show no connection to parent device. As per your advise, I have enabled the "debug dot11 dot11radi...
Hi. DId you ever get this AP model working as a WGB? I have some other issues regarding this AP and I believe I have tried everything using the 8.10.151.0 and the ap3g3-k9w8-tar.153-3.JPK2.tar image. From my side the WGB connects ok to the SSID uplin...
Yes, exactly what I am trying to do. Im fairly experienced in networking, but not setting up dsl connections. I got the devices from our supplier in a Cisco Try&Buy order and will probably return them because of this limitation. Is the similar limita...