Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!I work in a school district that has three main high school buildings, one alternative placement building, and the administration office for a total of five separate buildings. Very recently, I've had one of our school buildings send reports of...
I was wondering if we deny a wireless device in our DHCP filter on our Windows DC and that wireless client tries to connect to our WLAN, do they still show as a client on the WLC even though they are denied an IP address? Basically, our WLC client li...
Hello! I've recently tried to install Cisco ISE 3.0 on a Scale HC3 cluster which is a RedHat KVM-based system but am experiencing some issues. I wanted to go through the evaluation to see if ISE could even run on this platform. I've created the VM wi...
Thanks, Scott! That would make sense if you were getting an "IP address theft" exclusion reason if they were sending multiple authentication requests at the same time. Unfortunately (or fortunately?) I don't believe that is the case here. One auth re...
Hi @Mark Elsen I ran the RA trace that I had taken for TAC through the debug analyzer, and took a look at the log entries related to "IP address theft". Namely, the ones that say "SISF theft event IP_THEFT_ATTEMPT IP <IP address> <vlan #> ifhdl: 0x91...
Thank you for your input!The Cisco ISE live logs show nothing but successful authentications for one device that is a district-issued MacBook that is authenticating via cert auth. These devices can only connect to our staff SSID and can't migrate to ...
Hey Thomas, thanks for replying! No luck. Created a new VM with those specs and still get the database priming failed error. TAC also won't help, as stated above, because I don't have a service contract with ISE. So I'm in a rough spot with this eval...
