Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am experiencing random disconnects during an Airplay session to AirServer. Airserver disappears from the screen and Airplay session is gone. Here is the details of my setup:WLC 5508 7.5.102.01142n APsAirServer (1.9.4) installed on wired PCs.Wireles...
I have a 5508 WLC running 6.0.202.0. It functions as the Anchor Controller for the guest network. It sits in our Internet DMZ and is isolated from the rest of the network. It does not connect to AD, ACS, etc. The guest wireless WLAN is configured for...
During our implementation of Guest Wireless (currently ongoing), we are trying to decide where to point to for DNS.We have a 5508 WLC in our Internet DMZ and it acts as the Anchor WLC. This WLC is also used as the DHCP server for the Guest Wireless c...
In my lab I have a Guest Wireless network setup and fully functional. Here is a brief diagram:Client -> AP -> LAN switch and WLC-Foreign -> Core router -> DMZ switch and WLC-Anchor -> Edge Router -> InternetI have NME for credential management on the...
Yes I have a workable solution.Client connects to guest network on foreign controller. EoIP tunnel from foreign controller to anchor controller in DMZ. The WLAN and Interface for guest wireless have to be configured exactly the same for the EoIP tun...
To reach the public DNS servers you need their IP addresses to be specified in your DHCP scope. I used the internal DHCP server on the WLC-Anchor. The Guest VLAN traffic will also need to know how to get to those public DNS IPs because this traffic w...
Mohan - apoligies for the delayed response.I ended up going with a design that is more similar to your Solution1. I really did not want to deploy an additional switch into the DMZ as this would be more of a 'one-off' design.On your DMZ switch, you n...
