About Courage2020

Courage2020 · 02-16-2012

I created a new VLAN on a new switch. I can ping from the new switch to anywhere, but I can't ping the new Vlan from the old network. Thanks in advance. Below is my config on the new switch:Building configuration...Current configuration : 16080 bytes...

Courage2020 · 02-15-2012

I've created the VLAN on the Database but it tells me that there are no VLANs configured when i issue the command. Both VLAN 110 and 111 status are down, down. Thank you in advance. Below is my config:Building configuration...Current configuration : ...

Courage2020 · 02-16-2012

Thank you guys! Its finally working after creating a static route. Thank you Mandlenkosi, I really appreciate all the help.

Courage2020 · 02-16-2012

I just didnt have anything plugged in. Now that i have a workstation plug, its on up and up, but I still cant ping the vlan IP of 10.11.110.1 from my network. I can ping it from the switch itself where i have the VLAN configured but not on another sw...

Courage2020 · 02-15-2012

No results on the Trunk and Span. Below are the results:Router#sh ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - ...

Courage2020 · 02-15-2012

Under sh vlan, it does show both vlan 110 and 111 as active, but if i issue sh vlans, thats when i get the message "no virtual lans configured". I'm unable to ping the ip of the vlan. As for the trunk ports, how do i verify it. Thanks

Member Since	‎02-15-2012 11:19 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

I can ping the network from the new VLAN, but i cant ping the new vlan from the network

No Virtual LANs configured on 6500

I can ping the network from the new VLAN, but i cant ping the ne

I can ping the network from the new VLAN, but i cant ping the ne

No Virtual LANs configured on 6500

No Virtual LANs configured on 6500