Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I recently encountered a issue with a relatively simple config on a Cisco ASR920, we are simply bridging a service instance on one port to another port (which is working) However we are getting crypto errors on the ASR920 for traffic that is insi...
Hi Guys,I am really ripping my hair out over this one, I have reconfigured the router from scratch using all sorts of methods and can not work out whats wrong, basically when the client is going to their bank the login screen takes upto a minute to l...
Hi Guys,I have a little bit of a problem, I have a ADSL and ESHDSL service being delivered to a client site and then using HSRP to ensure that ADSL is provided first and ESHDSL will take over after.The ESHDSL is dedicated for DVTIs to branch offices ...
Hi Guys,I have a Cisco 881 and 877, with branch offices that have their own 877.Each branch router has a DVTI to the head offices 881 and 877, with the Tunnel going to the 881 being 4000kbps and the 877 being 800kbps. Using EIGRP to share the routes ...
Hi Guys,I have tried following the guides online but when searching for VPNs and IOS you are flooded with site-to-site VPN guides, is someone able to either provide snippets or some guides on how to configure a Cisco 877 for a VPN that can be used by...
Thanks for the response, I am aware it is VRRP traffic but my question is more as to why this ASR is even looking at the traffic as the traffic is a forwarding through two ports as a bridge (eg. all layer 2)
Hi,I had ignored the idea of MTU/MSS being a issue but thought I would give it a shot, orginally the MTU was 1492 on the ADSL Dialer, I lowered this to 1450 and set the MSS for VLAN1 to 1400 and the issue was resolved.Not sure why this is so differen...
Thanks Latchum is that all the configuration required? whats the mapping-id i assume this links into another configuration?PS. Will this work in my situation where both routers have a different WAN ip? How does each router know where to route this tr...
The link provided keeps giving me a 403 denied message, usually I can access documents on the Cisco website and I have a SmartNet cover?How else can I access this document?
