Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I hope there are some people out there who can help me.If I set up a LACP or PAgP channel between two 6504-E with a optical connection over a CWDM (Transmode TS Series, passive CWDM) LACP and PAgp do not come up. Using the command "show etherch...
Hello Nathan,an ACL does only deny or permit access. Lets say you want to deny traffic from source 1 to target 1 then your traffic is just denied in one direction. Traffic from target 1 back to source 1 isn't denied. You have to define it explicitly....
Hello Nathan,first of all, just to make sure:"Rules;CPD access everybodyEverybordy access SERVERSADM, USERS no access each other"ADM and USERS shouldn't access each other means that ADM can't access USERS and USERS can't access ADM?If so, my personal...
Hello Bobby,I am sorry but I can't send you the whole config because it is a configuration of my company and the necessary part is this one:aaa new-model!!aaa group server tacacs+ tac_adminserver name acs1!aaa authentication login default group tac_a...
Although the warning message:%AAAA-4-NOSERVER: Warning: Server acs1.teas.bessy.de is not defined.still appears while rebooting the tacacs+ authentication works.
@Bobby Roberts,thank you for your reply. I'd already exchanged the old "tacacs-server IP ADDRESS PORT KEY" command with the new one like on the example given on this page: http://slaptijack.com/networking/new-style-tacacs-configuration/So there isn'...
