About max.caines_2

max.caines_2 · 10-15-2014

HiTo do zero-touch switch configuration we need to be able to run a post-install script against each switch, to set the VTP and SDM configuration. The core 6509 which is the L3 gateway for VLAN 1 doesn't support post-install scripts, as it's running ...

max.caines_2 · 09-23-2014

I have a pair of FWSMs running active/passive. Firmware is 4.1. I want to reduce the failover time by tuning the OSPF hello and dead timers. I'm thinking of 1 second and 3 seconds, but given this is a disruptive change, I'd like an opinion on whether...

max.caines_2 · 12-02-2010

HiI've set up an old 1121 access point as a WGB on our unified (i.e. lightweight) wireless network. It works fine, but the VLAN thatthe wireless side connects to has between 200 and 300 clients at any one time. The bridge table size seems to be fixed...

max.caines_2 · 10-17-2014

Hi LeoWe have 3.6.0E on a pair of 4500X switches in one building. They've been running it for about a month without any problems, and we need it to support active Infiniband links. I guess we've just been lucky. After your warning though I wouldn't p...

max.caines_2 · 10-16-2014

Yes, I was aware of that. But as far as I know 15.2 is not available for the SUP-2T, so it doesn't helpRegardsMax

max.caines_2 · 10-08-2014

HI VibhorOK, I think you've convinced me. I shall leave them alone. As there won't be any more updates for the FWSM, it's only hardware failure that would cause a reconvergence event, so I think we'll live with thatRegardsMax

max.caines_2 · 10-08-2014

Hi VibhorOK, point taken, but there are people running sub-second timers on OSPF without problems, and while NSF may be coming for the ASA, the FWSM doesn't support it and isn't ever going to. What I was hoping was that someone might actually have tr...

max.caines_2 · 12-02-2010

Hi SergeThanks, that's very useful. The WGB has a good amount of RAM free, so I won't worry at the momentRegardsMax

Member Since	‎11-18-2009 08:38 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	9
Total Helpful Votes Received	10

User Statistics

User Activity

Smart Install using Director not on DHCP path

Safe values for OSPF timers on FWSM?

Bridge table size on WGB

Hi LeoWe have 3.6.0E on a

Yes, I was aware of that. But

HI VibhorOK, I think you've

Hi VibhorOK, point taken, but

Re: Bridge table size on WGB