Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a number of routers and PIX firewall around the country that I manage. RME has access to all of the routers via telnet and SNMP. As for the PIX I can only manage that once that RME can telnet into. It there a way for RME to manage the PIX via ...
I am having trouble configuring blocking. I followed all of the parameters on CSPM i.e. router telnet and enable passwords, interface, ip address. When I try to apply blocking, CSPM tells that the block is successful, but when I check /usr/nr/var/err...
I set up a 3000 Concentrator at the main office in my company. We were hoping to give access to our numerous small offices around the country which have access to the Internet via a DSL line. All of the sites run NAT to a local PDC/DHCP and the rest ...
We have several lan-lan VPN tunnels all coming form PIX firewalls to VPN 3015. They are all on the same backbone (ISP) and is working out verywell. We also have 50 remote users coming in to VPN 3015 in NY as far away as California. The are all workin...
VPN will secure data which can't be secured by other means like SSL. Building a VPN tunnel between two networks will emulate a point-to-point circuit. Sometimes VPN is called "poor man's private line". You can establish trust between NT domains or A...
I got this from this URL: http://www.cisco.com/warp/public/110/pixsyslog.htmlIn PIX Software versions 4.3.X and later, you can also do TCP syslog. PFSS supports this; most other syslog servers do not support it without reconfiguration. The command to...
