Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, We want to upgrade our existing 1Gbps LAN network to 10Gbps network using Optical Fiber at core level connecting different building blocks.We are looking for Core switch with all 24 ports having 10Gbps. Please suggest if Cisco has any product wit...
Hi,I am planning to have five Vlans in my network i.e Faculty,Administration,Students,Servers and Management Vlan on Cisco 3750-X Switch.Some of my Access devices are TP-link wireless APs that have no Vlan support.Now if have management Vlan and stud...
Hi,My friend has told me that we can use subnetting in class C i.e we can have 192.168.0.0/20 network.I am not not convinced as Class C have three octets of network and one octet for hosts.My friend says that class C private range is from 192.168.0.0...
Dear All,We have a scenario where we want to connect 14 access layer 2950 switches to Core switch 3750 via optical fiber in a LAN.What model of 3750 Switch should we use to tackle this situation.I have learnt that WS-C3750X-24P should support it.Isn...
Hi,I am experiencing a problem that when I telnet a router ip.It prompts for username and password.After entering username and password the router enter into exec mode with > prompt.But when trying to enter in privelege exec mode by typing en or e...
Thanx Leo for reply.You have mentioned that WS-C3850-48XS have required functionality but according to Cisco article at http://www.cisco.com/c/en/us/products/switches/catalyst-3850-series-switches/models-comparison.html there are two options we could...
How will I use class C multiple networks to have three Vlans that meet my ip range i.e Faculty=600,administration=400 and students = 400.As if we use 255.255.255.0 mask for each scope then only 254 address available per scope that does not meet my re...
I am designing network for university envrironment where there about 600 network nodes for faculty members,400 nodes for administration staff and about 400 nodes for students.I am planning to have three Vlans using Class C private address scheme.P...
If its valid range i.e 192.168.0.0/20 then why cant we have these dhcp scopes for clients that will assign addresses in the range?? 192.168.0.1/20 to 192.168.15.254/20 = 4096 clients192.168.16.1/20 to 192.168.31.254/20 = 4096 clients192.168.32.1/20 t...
