About jackolantern66666

jackolantern66666 · 02-20-2017

hello i have cisco 860 router i have an DHCP service working on it. when i plug a two devices onto a Lan network it getting IP addresses from the DHCP but if i replace a "broken" device with "another" device( so total devices on my LAN network remain...

jackolantern66666 · 01-22-2017

Hello how to backup it on the external drive or something else?

jackolantern66666 · 01-16-2017

Hello. I have this network: RouterWAN(132.66.0.1 on Gi0)==>RouterLAN(VLAN1 10.10.10.10 on Fa0)====>SW2960(10.10.10.1)====SW2960(10.10.10.2)===SW2960(10.10.10.3)====>WifiRouterLAN. in that scenario my WifiRouterLAN is not getting IP address from my D...

jackolantern66666 · 01-12-2017

Hello some of the fast Ethernet ports changed from 100 to 10 Mbps speed. Can i log the information or time when it happens on my ports? i mean can i track those changes and their times when it happens? some command in CLI for that?

jackolantern66666 · 01-10-2017

Hello, I have WAN network 132.66.x.x that i connect to Gi0 using SSH. and i have Vlan1 network 10.10.10.x. When i connects SSH to my WAN network, getting into the CLI, then try to ping the one of the PCs that connected to LAN and that got the 10.10.1...

jackolantern66666 · 02-20-2017

what does it means "client-name"? I don't need a names here. I am only talking about MAC and IP addresses. I want the device will keep it's IP address permanently even if the device is being reset.

jackolantern66666 · 02-20-2017

well thank you but it does not that i want to do , running around the all network and configure static IP. i want to make it simlier. like i have already configured "infinite" to the pool. but may be i need to add also "remember" to the pool?

jackolantern66666 · 01-17-2017

you were right. i configured spaning tree portfast on all the ports of the SW2960 and it worked.

jackolantern66666 · 01-16-2017

There is a "spaning tree portfast" configured on the Fa0 of the Router but no "spaning tree portfast" is configured on the SW2960 ports. On the WifiRouter i don't know yet. You think that configuration can enable Dhcp request packets to reach fhe Wif...

jackolantern66666 · 01-14-2017

Now i need to make a static ip addresses to all the devices on the LAN network. can i make a DHCP server that configured in my router cisco 860 to give a eternal lease?

Member Since	‎01-04-2017 12:18 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	52

User Statistics

User Activity

Make Permanent IP address to a specific MAC addresses(remember)

Backup Conf Cisco 860 series

Wifi Router Not receiving ip from DHCP

2960 Cisco Switch Fast Ethernet Ports Changed from 100 to 10 Mbps

NO ICMP reply from the Vlan1

what does it means "client

well thank you but it does

you were right. i configured

There is a "spaning tree

Now i need to make a static