Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am looking for a way to traceroute to a number of ip addresses(about 50) all at the same time. For example, every 2 hours I want to do a traceroute from a router to remote locations to confirm traffic is routing across the correct WAN circuit. ...
I'm using EEM to check the results of traceroutes and in the event I do not see an IP range in the traceroute results, I take a particular action. I am able to specify a particular address in set hop_found(192.168.108.153) and search for it. My issue...
Hello, I've done some reading on the discussion forum and see many people wanting to shape a circuit down to a certain speed. However, I'm looking to shape in a bit of a different way.We have a couple 3MB internet circuits and during a time of conges...
I have 1252 autonomous APs acting as non-root bridges and 1242 autonomous aps connecting to the 1252s. I wish to lock down which 1242 access point can associated to which 1252 access point. I don't want the 1242s to roam.Any suggestions on how to con...
Hello...I am having issues with clients who are connecting to LWAPP APs. They are not able to obtain an IP address via DHCP. If I give them a static address on the VLAN they are trying to connect to, they get on fine. The WLC is handing out the IP ad...
Joe,Thanks for the information. I have added multiple trace destinations but when it finds a match to send an email, after it sends the email, it throws me out of the applet and doesn't finish the remaining code. How do I force it to go all the way t...
Joe,Thanks for the response.If I could do 10 addresses every 5 or 10 minutes, that would be fine too. So if the script does it's traceroutes in a series, that's OK.When I do a trace, I am looking for a particular address in one of the hops. I am look...
