Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Currently we have a switch which has a static lan ip in a 10.61.129.x subnet (vlan 100). All our other switches are in a 10.61.200.x subnet (mgmt vlan 200) and are set to DHCP for their management ips.The switch that has an ip of 10.61.129.x won't se...
Hello,I've been on a project to point all our cisco network switches to our new NPS servers, so that multi factor authentication is done when someone logs in. I've been able to do all the switches except 2 which happen to have a vrf configuration on ...
Hello, I'm looking for help in creating an ipsec between a dlink dwr-925 and a cisco ASA. On the dlink I've had to tick the box to set the IKE and IPSEC proposal as it kept sending the wrong DH group no matter what i had configured on the dlink. Belo...
Hi, I'm trying to get an IPsec tunnel working, but it seems phase 2 isn't coming up. Their subnet is a /27 public IP and mine is a private IP subnet. I've attached the crypto debug output. I've also attached the config of the other end of the tunnel...
Hi, I'm trying to build an IPSEC tunnel from my cisco asa 5508 to another router. I've tried sending pings through to the other subnet for the 'interesting traffic'. This is from the other end of the ipsec tunnel, as well as our end. Nothing appears ...
The switch can reach the dhcp server via ping tests when sourcing from a stack interface ip in that vlan.What do you mean when you say is the switch an interface for that vlan? It's not the gateway if you're asking that.
i added your command so the group server radius config looks like this:aaa group server radius RadiusServerGroupserver-private 10.4.85.31ip vrf forwarding Mgmt-vrfip radius source-interface GigabitEthernet0/0Here are pings showing the accessibility:o...
