Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there again,I'm stuck on a DHCP issue for VoIP phones in a Meraki Access Manager environment and I'm not really sure how to solve this.I'm able to authenticate both devices to access manager, but the phone never gets an IP via DHCP. I'm gonna expl...
Hi everyone, I'm looking for a tutorial how to setup Meraki Access Manager with an on prem PKI for Windows devices.I've setup Access Rules, looking for the SAN, the cert issuer and the Meraki device name.I've setup an access policy for single-host us...
Hello everyone, our company is about to finally implement their first VoIP system.We are using Cisco SB SG350X for LAN connectivity.As far as I've learned, I have to decide wether to use Auto-Voice-VLAN with Auto-Smartports (AVV) or OUI-tables to use...
I already tried that as mentioned above. But I think I fixed the problem, but I don't know why it fixed the problem.When creating a port profile, you have the option to enter a data VLAN and a Voice VLAN. If you don't enter anything, Voice VLAN is le...
I was able to figure out what went wrong. I uploaded the certs from the om prem PKI, but chose the wrong identity.. https://documentation.meraki.com/Platform_Management/Access_Manager/Design_and_Configure/EAP-TLS_Certificate-Based_Authentication_with...
@giacomos Thanks for sharing this.The Palo Alto has one virtual router where all static routes match the desired subnet, e.g. Tunnel1 with 10.20.30.40/24 routed.On the Meraki site, there is one global setting for the VPN tunnelName "doesnt matter"IKE...
Did anyone ever solved this issue permanently? We're having the exact same issue between a Palo Alto Cloud Firewall and Meraki Z3s on multiple sites. On the rekey-step the tunnel stays online, but network traffic doesn't pass the tunnel. We have an I...
