Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Community,I have a problem regarding one of my device, in this case the Cisco 2960 Plus switch 48 port. some of the ports on my switch randomly not accepting PoE, but when it comes to a non-PoE device (such as switches and laptops) the ports w...
Hello Community,I have a problem regarding one of my device, in this case the cisco Firepower 2110 appliance, i'm using it as my NAT device for nat to the internet. there's nothing big about the configuration, the configuration in my appliance is onl...
Hello Cisco Community, I want to ask a question,I have 2 Office (HQ and Branch), both using WLC 2504 with software version 8.5, in those Office(s) i've configured an Employee SSID on each WLCs with a same SSID name, different subnets and different V...
yes, when i moved the device to a working port, it worked, but when i switched the worked device to that "random" port, its not working.and yes, the log said "PD Connected / PD removed", i have tried to set the power to limit the consumption accordin...
Have you checked the logs on the core switch the FTD device connects to? -no, i've only checked sh interface, its only tells me that the interface is downHave you checked the log files on the FTD device before performing a reboot? I understand that t...
Yes its @Rasika Nayanajith wrote:Are you using the same WLAN ID and map that WLAN ID to the same vlan in both WLCs? (in FlexConnect configuration) If the configuration identical, it should work. Anyway in FlexConnect configuration, your AP should abl...
