About BASILISGKOGKOS7311

BASILISGKOGKOS7311 · 11-04-2020

Hello. We are planning to move from C8500 controllers to C9800. I want to configure Flex connect Groups the same as the old ones. I want to ask how to configure Central Switching for the Policy Profiles for WLAN's?The old controller has the below c...

BASILISGKOGKOS7311 · 10-05-2020

Hello.Recently we migrate C8500 WLC to C9800 vWLC. I want to configure different country codes to different AP since they are located in different countries. At C8500 I configured Country Code from Prime using the Lightweight Access Points menu ( or ...

BASILISGKOGKOS7311 · 09-15-2020

Hello after enabling NAC on a C2960S-UNIVERSALK9-M , the authentication result in success but WKS doesn't obtain IPI receive the following log;194541: Sep 15 16:40:21.116 EET: %EPM-6-POLICY_REQ: IP 0.0.0.0| MAC 1803.7322.ff73| AuditSessionID 0A2E080D...

BASILISGKOGKOS7311 · 10-07-2020

Hi Scott.Thank you for your response. I will migrate the first AP the next days and check the config that will get from CLI. So the only way to config multiple AP with the same country code is only via CLI.

BASILISGKOGKOS7311 · 10-06-2020

I have already set up C9800 for two different countries. The tags have been configured and the corresponding Country Codes have been configured from CLI. Since the total number of AP's on those 2 countries is about 200, I was wondering if I can apply...

BASILISGKOGKOS7311 · 10-06-2020

Hi.To apply the same country code to many AP's I have to select them from Configuration -> Wireless -> Access Points -> All Access Points and then select the proper code from the Country menu, or there is no such configuration and I have to configu...

BASILISGKOGKOS7311 · 10-06-2020

I have configured the necessary county codes to support all the countries, but my question was about how to create a group with specific Country Code and assign AP to this group( like Lightweight Access Points group from Prime). It looks like C9800 d...

BASILISGKOGKOS7311 · 09-16-2020

Yes, it has L3. The switch that has the SVI and POOL works well with NAC. Gi1/0/10 0025.64d9.3d9c dot1x DATA Auth 0A09017600000180B34DA926Gi1/0/12 000d.0284.2d39 mab DATA Auth 0A090176000001ACC7435330Gi1/0/7 0025.64d9.017c dot1x DATA Auth 0A09017600...

Member Since	‎09-15-2020 06:37 AM
Date Last Visited	‎11-12-2020 11:11 PM
Posts	10

User Statistics

User Activity

Flex Connect Configuration on C9800

C9800 vWLC AP country code configuration on AP

ISE Authentication Succeed but the Windows not obtaining IP

Re: C9800 vWLC AP country code configuration on AP

Re: C9800 vWLC AP country code configuration on AP

Re: C9800 vWLC AP country code configuration on AP

Re: C9800 vWLC AP country code configuration on AP

Re: ISE Authentication Succeed but the Windows not obtaining IP