Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I am looking for some design help. We currently have dual routers ISP1 and ISP2 and plan to connect them to a single layer 3 core switch. I am trying to decide what way to go with the design. Do I use an IGP from the core to the CE routers and re...
Hi,
I am trying to get DHCP snooping setup on a single 3560 switch that connects to a Cisco 2921 router. I am running these commands.
ip dhcp snooping (global)ip dhcp snooping trust (interface to router) Router is running DHCPip dhcp snooping vlan...
For now I have just decided to use iBGP to the core switch. The design is really simple and I would just use static routing if I could summarize all the routes. Using iBGP no redistribution has to take place as well. I am preferring one outbound path...
Hi Chad. Do you also do anything to speed up the failover from the primary to secondary if the BGP neighbor drops to the PE? Like lowering the bgp timers or using ip sla?
Thanks. I think the issue I had in mind would not be an problem on a MPLS network. At the other end if you mean the branches or other office locations they currently only have 1 MPLS connection.
