I have 3550 switch running IOS 12.1(19)EA1c.I could not get the ingress enabled feature to work on the SPAN destination port.I have a monitoring device attached to the SPAN port which can insert traffic with dot1q encaps, but I cannot talk to that m...

Sometimes on our IP fragmented network, last fragments are falling below the size of 64 bytes and our filters are dropping them.Is there any workaround to configure that all the IP fragments will atleast of size 64 bytes.

ILMI State is "UpAndNormal" between the routers(7200) which says that 0/16 PVC is up and both routers are reporting the correct Remote peer IP address.I have this PVC 0/364 which has "ILMI MANAGE" enabled (OAM manage is disabled) on both routers, but...

I want to save the configuration on my BPX 8660 to a TFTP server or onto my PC.Incase my config got corrupted , I just want to load it directly from PC and bring ciruits up. Can anybody help me with this ?thanks,jagadesh

I got a serial (WIC-2T) port , on which I configured a FR interface-dlci switched & FR interface-dlci. My switched dlci is not seeing the IP traffic (but seeing appletalk) and my non switched traffic is seeing both.Router is 3810 with IOS 12.2thanks...