save config from BPX 8660

[jkodali]

I want to save the configuration on my BPX 8660 to a TFTP server or onto my PC.Incase my config got corrupted , I just want to load it directly from PC and bring ciruits up. Can anybody help me with this ?

thanks,

jagadesh

[smoosa]

Jagadesh,

The feature to save the configuration from the BPX using a TFTP server ( without the CWM ) was introduced in 9.3.30 release of switch software.

See the following link for information on details about this feature.

http://www.cisco.com/univercd/cc/td/doc/product/wanbu/bpx8600/9_3_3/cmdref/cmd02.htm#xtocid5

From the following link

http://www.cisco.com/univercd/cc/td/doc/product/wanbu/bpx8600/9_3_3/cmdref/index.htm

Select the PDF copy of the command reference guide and check page 4-447 for details on how to do the save and restore.

Hope this helps

Regards