Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a NAM 3.6.1 and we wanted to use the rotate files option in capturing. We have setup a capture data storage sucessfully and shows the mount space. But in the the capture to disk settings it still won't let you choose rotate files and the new ...
I have two questions? This might seem like some dumb questions but, we have dual CSM's 4.2.6 in 6509 IOS 12.2(18)SXF in bridge mode. 1st question is, we have backup clients on one network and the host on another. The host is on a vlan behind the CSM ...
We have dual 3030 4.7.2L in loadbalance and each is directly connected to redundant 6500 cores. Clients are authenticated sucessfully and get an IP from either concentrator but only the primary clients are able to access everything while the other us...
We have a pair of CSM 4.1.6 in bridge mode and we have a VIP for passive ftp set. We are seeing consistent errors with FTP port 1985. We took several captures and notice that conns show ESTAB on CSM but the client sends the SYN receives the SYNACK th...
We have a 6509 MSFC3 12.2(18)SXF7 and we notice that our passive FTP connections thru tcp port 1985 never makes it thru the switch? What's odd is all other ports work fine (ie tcp 1984 & 1986) normal tcp handshake. We took a capture on several portio...
Thx sadbulali, I see...but according to the tcp dumps on client and server you never see a FIN in either direction. What you do see is the client sending SYN the real gets the SYN it sends a SYN/ACK and the client then receives the SYN/ACK then the c...
Kmal, I enabled the OSPF and RRI on the private interface but it doesn't seem to be injecting the routes into our cores. I also notice that the OSPF neighbor relationships aren't being formed with the concentrator and core? Do you have examples of th...
Positive no acl's infact in another capture we notice the ACK never makes it to the the 6500. We took a sniff on the client and on the directly connected trunk we don't even see the ACK leaving? So we can safely say that the CEGSM 3020 cisco blade sw...
