Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please, help me.How much bandwidth i must reserved for transparent tranmission full e1 with NM-CEM-4TE1 via satellite channel, using max compression feature. TIA
When i type the command: sh access-l acl_name, i see that some access list lines with different content represent with identical line number. If i try to erase these lines, pix reflect with mess: "Specified access-list does not exist at that line". W...
I use a Cisco 2621XM Router with 12.3(11)T6 IOS, NM-HD-2V with VIC2-2FXS and I try to configure the t.37 protocol. Olso, I use a smtp Exchange server for a fax mail server and a fax machine connected in a FXS port. I use the Cisco Configuring documen...
I use a Cisco 2621XM Router with 12.3(11)T6 IOS, NM-HD-2V with VIC2-2FXS and I try to configure the t.37 protocol. Olso, I use a smtp Exchange server for a fax mail server and a fax machine connected in a FXS port. I use the Cisco Configuring documen...
After installing one more 128 MB memory module, error mess, that originated earlier, no more appeared and fax is outgoing to SMTP server. What reason for this requirement and how i can using t.37 with 128 MB memory module? Most of gateways, that i ha...
Busy tone is still present, but c2621 report to me this mess:%LAPP_ON_MSGS-6-LAPP_ON_CAUSE_NO_MEMORY: No memory availableMemory requirement for confuguration t.37 on c2600 is 48 MB DRAM (http://www.cisco.com/univercd/cc/td/doc/product/software/ios122...
