Has anyone looked into wall-mounting an Aironet 1250? We do not have ceilings in most locations which we can hang APs or antennas from, so I'm at a loss for how exactly we're going to use the 1250.
I have a CSM set up as a transparent load-balancer for our web caching appliances (bluecoat).When using predictor hash url, certain web apps break when the client moves between cache engines. It appears the applications are using IP address as the se...
The 1300 series is basically a 1231G with a coax-based power injector built into a weather proof plastic case. It operates only on the 2.4Ghz spectrum (802.11g) which as mentioned is crowded and potentially more subject to interference.The 1400 serie...
AIR-AP1231G are not 802.3af power over ethernet access points. There are some 802.3af PoE switches which can provide Cisco-PoE, but if the switch does not explicitly support such power they will not power on the AIR-AP1231G.For example, the HP ProCur...
Yes, when you issue a:session slot N proc 1/2You are basically doing a telnet from the exec shell on the 6500 into the WiSM through the virtual service port. This is why you have to set up a DHCP pool for the service vlan.
You can build a wireless network like this, but you need to be aware that wireless has significant bandwidth limitations.It is easy to build a wired network where each user will have guaranteed 10 Mbps connections to the server resources. This is esp...
