Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a customer that has an issue where an SSID is not existing on 2 APs on the same controller at 10 others. 4.2.130 code. WLAN override and AP grouping is disabled. Any idea why this SSID did not push out to the other 2 APs?
A quick update for those of you who might not know. 802.11n has been approved by the IEEE taskgroup N and has been moved for a September vote in RevCom. This means that .11n is really close to full ratification and should be fully ratified by year en...
As this is a completely new version of code I would ask everyone to remember your first experiences with 4.0 and 5.0 code releases. Test 6.0 extensively in controlled environments before deploying into production. Any bugs you see in your testing ple...
Hey Victor,
Remember that high channel utilization can come from a lot of different places. Client devices, APs, and even a high level of the noise floor (causing excessive retries) can be the source of the issue. If you have a copy of Airmagnet WiF...
Hey George, Just ran into something strange here. I have SSID set to G only. I have 1,2,5.5, and 11 disabled and only G rates as mandatory. I still have b clients joining the WLC (8.0.120.0). I go to highthroughput section and disable the MCS0 rate a...
