About jpolczyn

jpolczyn · 01-23-2008

Has anyone looked into wall-mounting an Aironet 1250? We do not have ceilings in most locations which we can hang APs or antennas from, so I'm at a loss for how exactly we're going to use the 1250.

jpolczyn · 08-27-2007

I have a CSM set up as a transparent load-balancer for our web caching appliances (bluecoat).When using predictor hash url, certain web apps break when the client moves between cache engines. It appears the applications are using IP address as the se...

jpolczyn · 02-26-2008

The 1300 series is basically a 1231G with a coax-based power injector built into a weather proof plastic case. It operates only on the 2.4Ghz spectrum (802.11g) which as mentioned is crowded and potentially more subject to interference.The 1400 serie...

jpolczyn · 01-30-2008

AIR-AP1231G are not 802.3af power over ethernet access points. There are some 802.3af PoE switches which can provide Cisco-PoE, but if the switch does not explicitly support such power they will not power on the AIR-AP1231G.For example, the HP ProCur...

jpolczyn · 01-30-2008

The AIR-AP1220 cannot be converted to an LWAPP image. The AIR-AP1231 converts without problems.

jpolczyn · 01-30-2008

Yes, when you issue a:session slot N proc 1/2You are basically doing a telnet from the exec shell on the 6500 into the WiSM through the virtual service port. This is why you have to set up a DHCP pool for the service vlan.

Re: DESIGN-WLAN for 500 users · 01-30-2008

You can build a wireless network like this, but you need to be aware that wireless has significant bandwidth limitations.It is easy to build a wired network where each user will have guaranteed 10 Mbps connections to the server resources. This is esp...

Member Since	‎08-29-2006 05:37 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	11
Total Helpful Votes Received	10

User Statistics

User Activity

Wall Mounting a 1250

CSM: predictor hash url vs predictor hash address source

Re: Diffs between Aironoet 1300 and 1400

Re: AIR-LAP1232AG-A-K9 and POE 802.3af problems

Re: Upgrading Autonomous to Lightweight

Re: WiSM information

Re: DESIGN-WLAN for 500 users