Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have installed an 871 ethernet Router in our network. DNS DHCP servers are disabled. Simple static IP addressing. one simple static route configured. Have configured the simple SDM firewall.We are natting the static hosts with the router Static g...
I have SDM and SDM Express installed on our 871 Ethernet Router. I am familiar enough now with the router and SDM that I find that SDM Express is no longer useful. Is there documentation somewhere the will tell me what I have to do to un-install on...
We have a 871 Router that we are moving to a network at our new location. This means that we must configure the Router with a new Outside static IP address as well as Default gateway, DNS IP addresses.Is it possible to edit the present configuration...
When backing up the router IOS with the following command: Router# copy flash tftp: The IOS asks for the source file name. What is the correct source file name for the IOS?Thanks in advance.
We have a network with a Catalyst 500 switch and a 871 Ethernet router. The router has been configured ,with SDM, a SDM default medium security firewall. We observe that there is continuous traffic between the router and the internet(DSL modem). I ...
Hi Rick:CDP is disabled. I got hold of a Cisco document- "Cisco Guide to Harden Cisco IOS Devices". It has a list of services that should be disabled if not used. I guess I will have to work my way through the list. Thanks for your help, it is gre...
Your reply has helped greatly. It has narrowed down the problem area. I did, however,have problems entering the commands that you provided (see attachment). The IOS CLI would not accept the complete ip inspect command, it would only accept "ip ins...
