Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a couple of questions.We have a PIX 515E and clients conencting remotely using Cisco VPN client 51. How can I display a message box when thsy connect with some text in it that they have to agree to? and if they don't can they get disconnec...
Hi, I found that on a PIX 501 I defined a 1 line ACL on inside interface:access-list acl_inside permit TCP host inside-host host ext-host and then when I added:access-group acl_inside in interface insidethe users could not access anything outside of ...
Hi, currently we haveusers using Cisco VPN client 3.6 and I'd like to roll out the latest version 4.x.(?) CAn this be downloaded from Cisco, is it free etc.Also I'd like maybe to upgrade the PIX 515 from 6.3 to latest version 7.x(?). Wher can this be...
Hi, please refresh my mind on the format of this acl command.I need to add to an acl on PIX outside interface to permit an external subnet address eg 123.123.123.0/24, access to an inside host 10.10.10.10 using smtp port 25. Thanks
Hi, I'm setting up a test network between 2 sites. SiteA has a 515E PIX and SiteB has a 501 PIX. Both sites have been setup with a site to site VPN tunnel, see SiteA config below. I also require that remote clients using Cisco VPN client 3.6 be able ...
Thanks for the advice.have you ever seen even a message box with text and an OK button. I'm not bothered about the disconnecting bit.I nothice in vpn client there is a Notifications section, do you know what this is used for?thanksmarty
Hi, So I should at least add a 2nd line to allow all ip traffic from internal network address to an external network address.Eg this is a branch office with a VPN tunnel to HQ.So I should add ACL on inside interface to permit ip from branch office ad...
Daniel, thanks thats done it. Ive changed the IP pool slightly but this acces-list allows ping from remote client to inside pcs.Is there an alternative to radius, like be use anymous or a local pc username to connect rather than a domain account?Chee...
OK, some success here. I can connect with VPN client now and the site to site tunnel remains up. I'm assigned an ip address from the address pool 200.220.200.1xx BUT What I cannot do from my remote client is ping or connect to any inside host eg 200....
