I will be shortly upgrading a 6509 (hybrid mode SP catos and msfc IOS) with sup 720 with a new sup 720. Could someone please advise on saving the config for the SP/MSFC what are the potential problems that I need to look out and what are the questio...
Can anyone guide me with this error please...4w5d: %C4K_EBM-4-HOSTFLAPPING: Host 00:19:06:14:20:BF in vlan 40 is flapping between port Gi6/40 and port Po14w5d: %HSRP-4-DUPADDR: Duplicate address 10.4.95.253 on Vlan40, sourced by 0019.0614.20bf
Ap 1130 are not getting register with wireless controller . error msg poing on ap'sLWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolveCISCO-LWAPP-CONTROLLER. I have enabled DHCP option 43 .. please guide where im doing wrong
AP 1130?s are not able register with WiSM controller on 6500.. Do I need manually Configure controllers on AP??Even Ap's are not detectable by cisco WCS.They are pick up DHCP i can ping frm WiSM and WCS....
Thanks for the quick reply. Attached Physical topology diagram also the partial config@ Access layer we got stack of 3com switches. The STP is disabled. @ Distribution layer we have two 4506 A and B . A is root. All the ports are Desg FWD (Ether chan...
Debug on the controller shows.. LWAPP Join-Request does not includevalid certificate in CERTIFICATE_PAYLOAD from AP..how to upgrade the certificate ?? or any other solution
I've sup 720 with me .. But Im not the one who order . My worry is what OS it has ?? Cat OS or native .. becouse i ve no clue about cat os Catalyst 6500 supervisor 720 fabric msfc3 pfc3b.
I've only these two modules 8 8 port 1000mb GBIC Enhanced QoS 48 48 port 10/100/1000mb EtherModuleHope there should not be any problem My worry is OS on sup 720 ??? since ive not ordered .. what is the best bet 2 check ?Ive spare 4506 with me ? d...
On sup 2 The ios Version is "disk0:c6sup22-dsv-mz.121-23.E2.bin"Do i need to bring down the box or its hot swapable ??? Im not sure what ios there on sup 720
