Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I need to find out Serial Numbers, and part numbers for each item in the Chassis/Switch ( including power supply, sup modules, msfc2's, switch blades, etc). Can you please help ?I have tried various commands for example "Show Inventory" and "s...
Hi,I am planning to configure my 1st VOIP installation using 2 3750 switches stacked togather and 3rd switch linked up via SFP Gigabit link. I have planned to use 5 vlans. The total users are 70 and this is a stand alone site.For IPT phones and serve...
Hi,I have site where I need to control L2 access to the LAN. What options are available can you give me some pointers please...The site is remote with MPLS to the site max 15 permanent and 10 company visitors need access to the LAN. Already live.The ...
Hi All,One of my customer has asked me to find out if it is possible to use IP softphone to make national&internation call.Your help to elaborate what exactly is required for this kind of setup will be much appriciated.Customer has DSL connetion at h...
Hi all,I have a C2950 which had c2950-i6q4l2-mz.121-11.EA1.bin , I was able use web console. I have upgraded the IOS due to a bug in the old one, everything seems to work fine but I am unable to Web console to the switch, IP http server service is e...
I have seen this error but with newer WLC codes. Check all newly added APs, one of them has IP address assigned same as AP manager interface which makes the AP manager IP invalid when AP bootup, it cannot join. Check check your newly added APs and ...
Hi Vicky,I have hit the exact same issue today. I have all sorts of devices including a few Win8 working fine with WLC controllers. There 2 pcs i have come across just today which do not want to connect to WPA2-AES SSID.I have been looking into this ...
Hi,you can also use CACTI, its free but need a bit time and effort to get it implemented, works very well.Here is the link, and some screen shotshttp://www.cacti.net/screenshots.phpHope this helps !!!Shaheen
Hi Lorenzo,You need to add new configuration, the same way as you have for the existing IP range. For exampleip dhcp excuded-address 192.168.200.1interface vlan4 ip address 192.168.200.1 255.255.255.0 ip dhcp pool NewVlan4 network 192.168.200.0 255.2...
no, it will not work as host range 33-62 falls in with your existing subnet 10.5.1.1/24 (which has a host range 10.5.1.1 to 10.5.1.254)this link will help you to explain how/why to subnethttp://articles.techrepublic.com.com/5100-10878_11-5033672.htm...
