Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a server connecting to another server on another site. I have created a static NAT for my server, but I have a problem that after about 2 minutes of idle time the connection is lost and I can not communicate with the other server until it o...
I am looking for a Syslog application for the Pix has anybody got recomendations, I have tried the Solar Winds I have tried Kiwi, I have tried using Saw Mill on both those data bases or having the syslog into a SQL database.I am running out of ideas ...
Hi we have a 506E but have recently purchased a 515E, I have been religiously thinking if it ever goes down I will have the config to copy back in. so thinking this was possible I have thought that I could simply load the config onto the new 515E , n...
I currently have a PAT on a public ip it is currently translating all internal to external traffic.I have been told that I can use this public ip to translate incoming traffic aswell for example I can make it translate incoming traffic on port 5000 t...
Make sure that you are using the same trunking methods on both switches.2900 series if I am not mistaken use 802.1q only so you are going to have to make sure that your 3500 switch is using the same trunking method. 3500 can use ISL or 802.1q. also m...
thank you to all who tried to help me out, pitty I didnt solve it but I think I am going to have to get cisco in here to check this out because this is just to bazaar. murphies law the minute the engineer from cisco arrives it will work. if any body ...
currently I have had to put a hub there until I get the switch to work.the hub works fine. I had enabled the untrust side to reply to icmp packets for the purpose of testing currently disabled because I have the hub there and it is working.I have bou...
Help needed urgentlyok I have been playing around and I have noticed that loopback was not set on the vlan so tried it out and now I am getting traffic across the switch but very intermittenly and at about 1000 ms latency. which is strange if you hav...
the tunnel would probably be the best option. but this is all depended on wether routerB2 has an ip that no device in networkA is using otherwise you will have problems.What could also do is add a secondary ip to routerB2 totally out of the range of ...
