Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So I set the Windows server as an authenticator, and configure the switch to authenticate windows 7 Pc (supplicant). At this point, I am pretty sure that the configuration on Windows 7 and windows server is fine, and the problem is with the switch. S...
I'm trying to establish dotx authentication, but I get the following error "%DOT1X-5-FAIL: Authentication failed for client (aabb.cc02.b030) on Interface Et0/3 AuditSessionID 000000000000000D004DBFB8". Both the authenticator and the supplicant are sw...
I'm welling to configure the router (c7200) as a DNS server. However, the router do not recognize "ip dns server" command. Is there a way around this command?
I have configured IPsec using asdm site-to-site VPN wizard. Based on "show crypto isakmp sa" and "show ipsec sa" the tunnel seems to be up and fine. However pinging from one site to the other doesn't work. -------------------------------------------...
However, referring to your first reply. no I am not trying to authenticate 2 switches, one switch is acting as the authenticator using its local username database, and the the other switch is the supplicant, user credentials is right, as well as the ...
So I found the issue. After pinging from site A to site B, I found that site A encrypts the traffic and send it, on the other hand, site B receives the traffic, decrypt it, but does not encrypt and send reply. I was thinking that Site B ASA keeps on ...
hello there, thanks for your reply. I created the rules that permit icmp traffic in both sites, as shown above. As you can see site A encrypts but fails to decrypt, and the other site decrypt yet fails to encrypt. I assume that site B cannot encrypt ...
So I created an access list that permit icmp traffic from remote site inside network to local site inside network, in both ASA1 and ASA2, and assign the rule on the outside interface. Yet still connection fails!! ASA1 config:- access-list hq-riffa ex...
