Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have tried to update an AP running a mobility express-firmware via tftp, remotely and point-to-point from console, as well as remotely via the web GUI, all to no avail. I've been trying to update from AIR-AP2800-K9-ME-8-10-130-0 to AIR-AP2800-K9-ME...
Hi. Just like in the picture above. ./ You need to change the mode from CAPWAP to MOBILITY-EXPRESS mode (one of the links above should show how to do that). You can do that via tftp using a mobility-express firmware that is about 70MB in size the fir...
First you need to download the image file that is over 500MB in size. Unpack it and to upgrade the AP via tftp you need to upload only one file from the folder that is relevant to your AP model. In my case it was ap3g3. Yours is the same btw. The res...
Cracked it!Had to put in ./ for imagePath to indicate it's in the root of the folder the tftp server was already using and it started updating the image.
Changed the file path to TFTP Path........................................ D:/AIR-AP2800-K9-ME-8-10-151-0/and received the below, which for a moment looked promising TFTP Code transfer starting.Reading AP Bundle IMAGE version info.Could not download ...
Thanks for the info Scott. I've tried that as well and the result is the same. However, I've tried to download the file to the controller via tftp from the console and this is what I get. The file verison.info is in the folder. I'm using Tftpd64 as a...
