Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI all, I will have users using Amazon Connect Soft-phone Application and Polycom IP phone connected to the C3850
VLAN 21 (Amazon Connect Soft-phone Application) : 10.102.21.0/24 Traffics go thru ASA#1 10.10.10.2. If ASA#1 goes down, I want VLAN21 ...
hi all, i deployed a wireless network with 5 AP 1252 and 1 WLC 4402 to cover 22,000 sqf. the issue that am having is if i disconnect any of the 5 AP the whole wlan goes down
Hi allI am looking to load balance outgoing internet access over a T1 and a Cable Modem Internet link; which Cisco router you recommend me that include wireless access, plus firewall and site to site vpn
Thank Dennis for the quick reply.
So far i had setup VLAN 20: 10.102.20.0/24 to access the internet thru the ASA#2 10.20.10.2.
VLAN 21: 10.102.21.0/24 will be on a private direct connection point to point 1GB fiber circuit to AWS on the ASA#1 10.10.1...
Thanks at lot for this valuable info.Yes, I see this Rogue Aps:under Unclassified Aps:00:10:7f:13:15:06 ssid Crestron-13150600:21:29:87:6c:d6 ssid Linksysunder Adhoc Rogues:00:02:6f:50:7a:4b ssid BSSID 02:06:69:3b:2d:caand they are wirelessly connect...
Thanks for the reply.After I received the wlc; i upgraded to 6.x before I started the configuration; I never used the configuration that came with it. Should I downgrade to 5.2.157?
