Hello, I have a CISCO 4331 with a 24 Port Switch Module installed internal to the router. I also have a Cisco 9300 24-port SFP switch (no network module). I am trying to establish connectivity between all three devices. Normally, I set up VLAN Int...
Thanks for the link, it definitely explained things well. Unfortunately I was unable to establish the connectivity between the two switches and the router. The BDI2 I created kept showing as DOWN/DOWN and I wasn't able to configure the internal int...
Georg,Thank you for the assistance. It appears that on my 4331, I can not issue the service instance command on the sub-interface. But I am trying to research some more. Thank you again for the assistance and any other help you might provide.Keith
BB, Here are the running configs for the 4331 and the Internal Switch as they currently work. The communicate with Interface VLAN 2 configured on each device. Currently, the 9300 is not connected to the router or the switch. My goal is to connect ...
BB,Thank you for the reply. I would say that I explained it wrong and not that you misunderstood. In summary, I have all three devices with the IP's above that need to communicate and route VLAN 2 with the given IP's across all three devices, withou...
