About dajohnso

dajohnso · 04-27-2025

I have a network that connects two buildings with switch A and switch B. These two switches are connected with a pair of trunks using 1G dishes. I have about 10 vlans configures in my environment and everything works fine for my equipment and network...

dajohnso · 02-24-2021

Maybe this is a silly question but I want to verify before I make any changes. I have several vlans configured in a domain on a bunch of 2960 switches. We had a device that was routing between a few vlans that is no longer operational. I am introduuc...

dajohnso · 12-19-2020

I have seen several questions answered similar to this one but not 100% they match exactly? I have setup several ASA's with outside interfaces that have several IP addresses, now I am trying to set one up that only has 1 static public IP on the outsi...

dajohnso · 04-27-2025

Thanks. So far I have tried to follow this and have been unsuccessful. I did manage to block the cdp now so the vendor switches do not see my switches and I don't see theirs. I setup 4 C4948's on my desk Switch C int gi1/44 is plugged into switch A i...

dajohnso · 04-27-2025

Sorry, thought I had added it.I am using Cisco WS-C4948 running cat4500-entservicesk9-mz.150-2.SG11. The vendor switches are some form of Meraki switch.

dajohnso · 02-27-2021

This answer is much clearer. I was mostly having a problem following the gist of the previous answer since the English was difficult to decipher and IMO could be interpreted in several ways and I was already a little confused. I have been working wit...

dajohnso · 02-26-2021

I couldnt understand either of these answers but good news, I found a device on the network that was a layer 3 switch so I am adding IP Routing to that switch. It already has all the vlans so everything should work.

dajohnso · 12-19-2020

Thanks, it took that command ok, lets see if it works.

Member Since	‎12-19-2020 01:26 PM
Date Last Visited	‎04-27-2025 04:15 PM
Posts	8

User Statistics

User Activity

How can I pass another complete network over my network

VLAN's on cisco switches

asa NAT and outside interface overlap

Re: How can I pass another complete network over my network

Re: How can I pass another complete network over my network

Re: VLAN's on cisco switches

Re: VLAN's on cisco switches

Re: asa NAT and outside interface overlap