About EvanC75

EvanC75 · 04-20-2025

I have the latest FTD running which is 7.7.0 on Firepower 1010. From the web interface i open a CLI popup window. I used to be able to just enter "show environment" and it would show me the temp but now it just says command execution failed. It ha...

EvanC75 · 01-25-2025

I am running Firepower 1010 appliance with FTD 7.4.2. I encountered a strange issue where the DHCP server on it is not pushing the updated DNS that I set. I setup a new DNS server so it has a different IP. In the FIrepower 1010 device management, ...

EvanC75 · 10-02-2024

Hello, sorry I always have trouble finding this information. What are the product numbers for the SmartNet License and the Security K9 license for the Cisco ISR C1111-8PWB?

EvanC75 · 09-26-2024

I converted my C9105AXI to EWC and now I want to switch it back to CAPWAP. I tried following the directions from the post below.https://community.cisco.com/t5/wireless/how-to-convert-from-ewc-to-capwap-mode/td-p/4663375wireless ewc-ap ap shell usern...

EvanC75 · 08-24-2024

Hello, sorry if this has been asked before but it has become more difficult to find information lately. My Firepower 1010 appliance is using FTD 7.2.8 which is listed as the suggested release. I have the Threat license installed. It is a standalon...

EvanC75 · 04-24-2025

Thanks. I had to do this through SSH since the commands don't work on the web CLI. Am I correct in assuming that getting the temperature from the web CLI is not possible?Also side question, the CPU is running pretty hot at 73 C. I have it wall mou...

EvanC75 · 02-09-2025

Unfortunately, I cannot help you on that. Even after all this time, I am still very much a Novice at this and cannot do critical thinking very well in my old age. Replying to this existing topic won't get much attention, might I suggest creating a ...

EvanC75 · 01-26-2025

Understood, thanks for the clarification.

EvanC75 · 01-26-2025

Thank you for the video. That was definitely what I missed on going to the Configuration tab under DHCP server and setting primary DNS IP address. I'm just getting forgetful these days. I was able to get that switched over and now the clients are ...

EvanC75 · 10-06-2024

No problem thanks!

Member Since	‎12-22-2020 11:58 PM
Date Last Visited
Posts	104
Total Helpful Votes Received	18

User Statistics

User Activity

How do I get the temperature of the Firepower 1010 appliance?

FIrepower 1010 DHCP not pushing updated DNS

ISR C1111-8PWB smartnet and security license numbers

Cannot change C9105 back to capwap mode - ssh connection refused

Firepower Threat Defense 7.2.8 vs 7.4.2

Re: How do I get the temperature of the Firepower 1010 appliance?

Re: How to route VLANs on Firepower 1010

Re: FIrepower 1010 DHCP not pushing updated DNS

Re: FIrepower 1010 DHCP not pushing updated DNS

Re: Cannot change C9105 back to capwap mode - ssh connection refused