Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello community, Can any one give me explanition for the result of the command bellow :sh policy-map interface Gi1/1/2
GigabitEthernet1/1/2
Service-policy output: QOS
queue stats for all priority classes:
Queueing
priority level ...
Hello Community, Actually am working for QOS project for Snom phone and Microsoft 365 traffic,we decided to Mark traffic from the terminal (IP Phone and PC with GPO)in access layer we have cisco catalyst 1000, then I configured "auto qos trust DSCP" ...
Hello Community, to control access to routers in our Backbone, I decided to install a freeRadius Serverall thing are Ok with cisco IOS and IOS XE plateforme but I have an issue with IOS XR platforme.I launched a debug in my FreeRadius Server when I w...
When I tried to use access-list to match all DSCP EF traffic class-map match-all Voicematch access-group name COS1policy-map VOICEclass Voicebandwidth percent 30 int gigabitEthernet 2/1/43650G-chantilly-1(config-if)#service-policy output VOICEI have ...
